产品概述

The AKK TX3000AC is a 3W (3000mW) 5.8GHz FPV video transmitter engineered for long range FPV, drone racing, freestyle and industrial drone applications. Output power is switchable from 25mW up to 3000mW across six levels (25mW / 250mW / 500mW / 1000mW / 2000mW / 3000mW), so you can fly close range or push extreme distances with the same VTX. It covers 10 bands with 8 channels each (80CH) in the full 4.9–5.8GHz band, with SmartAudio and OSD configuration letting you switch power, channel and band from your flight controller or goggles. A built-in cooling fan plus a 5-second slow power-on protects the module under high load and prevents burn-out at power-up. The wide 14–28V input (ideal for 6S LiPo) powers a 5V camera output (up to 500mA), and the MMCX antenna connector with a JST 6-pin cable makes installation quick. PIT Mode keeps you safe on the bench, and Betaflight VTX table setup is straightforward. For a long distance video transmission drone build, the TX3000AC is a dependable full-band choice.

013000MW ULTRA LONG RANGE OUTPUT — Six switchable power levels (25mW / 250mW / 500mW / 1000mW / 2000mW / 3000mW) deliver stable, long-distance video transmission for long range FPV and drone racing.
02FULL BAND 80CH — 10 bands with 8 channels each across the full 4.9–5.8GHz band; strong anti-interference for racing, freestyle and fixed-wing flights.
03SMARTAUDIO + OSD CONFIGURATION — Switch power, band and channel from your flight controller or goggles; easy Betaflight VTX table setup, no disassembly needed.
04BUILT-IN COOLING FAN & SLOW POWER-ON — Active cooling keeps the 3W module stable under sustained load; the 5-second slow power-on protects the VTX from surge burn-out.
05WIDE 14–28V INPUT & 5V CAMERA OUTPUT — Ideal for 6S LiPo batteries; clean 5V output up to 500mA for your camera; MMCX antenna connector and JST 6-pin cable for quick installation.
06PIT MODE + SAFE BENCH SETUP — PIT Mode keeps output low while you configure on the bench; 30.5mm mounting holes fit standard stacks.

02 / 技术资料