产品概述
The AKK TX5000AC is a 5W (5000mW) 5.8GHz FPV video transmitter engineered for ultra long range FPV, drone racing, freestyle and long range drone builds. Output power is switchable across six levels (25mW / 200mW / 500mW / 1000mW / 3000mW / 5000mW), so one VTX covers close-range practice and extreme-distance flights. It covers 12 bands with 8 channels each (96CH) across the full 4.9–6.1GHz band, with SmartAudio and OSD configuration letting you switch power, band and channel from your flight controller or goggles. A built-in cooling fan with smart temperature control plus a 5-second slow power-on keeps the module stable under sustained load and protects it from surge burn-out at power-up. The wide 14.6–28V input (ideal for 6S LiPo) powers a 5V camera output, and the button control lets you select channel, band and power on the bench without a computer. PIT Mode keeps output low while you configure, and the 96-channel layout reduces interference in group flying. For a long distance video transmission drone build, the TX5000AC is a dependable full-band choice.
- 015000MW ULTRA LONG RANGE OUTPUT — Six switchable power levels (25mW / 200mW / 500mW / 1000mW / 3000mW / 5000mW) deliver stable, long-distance video transmission for long range FPV and drone racing.
- 0296CH FULL BAND — 12 bands with 8 channels each across the full 4.9–6.1GHz band; strong anti-interference for racing, freestyle, fixed-wing and group flying.
- 03SMARTAUDIO + OSD CONFIGURATION — Switch power, band and channel from your flight controller or goggles; easy Betaflight VTX table setup, no disassembly needed.
- 04BUILT-IN COOLING FAN & 5-SEC SLOW POWER-ON — Smart temperature control keeps the 5W module stable under sustained load; the slow power-on protects the VTX from surge burn-out.
- 05WIDE 14.6–28V INPUT & 5V CAMERA OUTPUT — Ideal for 6S LiPo batteries; clean 5V output for your camera; button control for quick channel, band and power selection.
- 06PIT MODE + SAFE BENCH SETUP — PIT Mode keeps output low while you configure on the bench; 25g lightweight design fits any long range or racing build.
规格参数
- 产品型号
- AKK TX5000AC
- 频率
- 5.8GHz
- 频道数
- 80CH
- 输出功率
- 25mW / 200mW / 500mW / 1000mW / 3000mW / 5000mW
- 输入电压
- 7-36V
- 输出电压
- 5V@500mA
- 控制协议
- IRC Tramp
- 天线接口
- MMCX
- 尺寸
- 36 x 36mm
- 安装孔位
- 30.5 x 30.5mm
- 重量
- 约25g,不含天线
- 其他功能
- Smart Audio
- 包装内含
- VTX 图传发射机、连接线、天线延长线
频道频率表
完整频段与频道频率核实后,将在这里提供可复制的表格。当前不提供未经确认的配置文件。
安装与接线

产品细节实拍






确认与你的系统匹配
提供现有设备型号、所需版本和数量,核对兼容性后再下单。