Product overview
The Shrimp B 3.3G 4W VTX is a high power FPV video transmitter built for long range FPV and long range drone builds. Operating on the lower-interference 3.3GHz band, this 3.3G video transmitter covers 3060–3495MHz across 64 channels with dedicated 3.3G frequency bands, giving pilots cleaner analog video signal at distance than crowded 5.8G setups.
Output is switchable PIT / 25mW / 200mW / 1W / 4W — a true 4W VTX / 4000mW class module for long range FPV video transmission. FM modulation with PLL frequency control keeps channels locked, and full IRC Tramp protocol support lets you control power and bands from your flight controller and goggles. The 3.3G VTX accepts DC 7–30V (2–8S), ships with an SMA 50Ω antenna interface, and weighs only 25.3g, so it fits most rc drones and FPV drone builds.
- 01True 4W / 4000mW output power — a high power 3.3G VTX that takes long range FPV video transmission to a new level.
- 0264 channels from 3060–3495MHz with dedicated 3.3G bands (3330–3470MHz / 3170–3310MHz) for cleaner analog long range video.
- 03IRC Tramp protocol with FM + PLL frequency control — set power and channels straight from your FC or goggles.
- 04Wide DC 7–30V (2–8S) input with PIT mode and SMA 50Ω antenna interface; featherweight 25.3g fits most FPV drone builds.
- 05Purpose-built for long range drone builds — a 3.3GHz analog VTX that pairs with 3.3G VRX and RHCP antennas for extended-range setups.
Specifications
- Frequency Band
- 3170-3470MHz (3.3GHz)
- Channels
- 16CH
- Output power
- 4W (5 levels: 0/1/2/3/4)
- Frequency Precision
- ±200KHz (Typ.)
- Frequency Stability
- ±100KHz (Typ.)
- Input voltage
- DC 7-30V
- Current@12V
- 160/270/550/880/1400mA
- Antenna
- SMA 50Ω
- Control protocol
- IRC Tramp
- Modulation
- FM
- Video input
- 1V±0.2Vp-p (Typ.)
- S/N
- >55dBc (For±3MHz)
Features
- Custom digital PLL circuit, chip-level integration, no frequency drift, stability ±100KHz
- Efficient PA and power calibration for consistency across all 16 channels
- 5 adjustable power levels (0-4): 160mA~1400mA@12V, balance efficiency and range
- Custom band 1.4-2.8GHz available, max bandwidth 300MHz
Applications
- Long-range FPV for racing drones, fixed-wing, RC aircraft
- Analog VTX system installation, repair, or power upgrade
- Long-range video relay and ground station reception
Installation & Usage Tips
- Connect 3.3GHz antenna BEFORE power-on to prevent damage from high-power operation without load
- Ensure power supply is within DC 7-30V range; verify polarity and video signal connections
- High power generates heat; ensure adequate cooling space and avoid prolonged static full-power operation
- When using multiple devices, plan channels in advance to minimize co-channel interference
Band / channel table
| CH1 | 3170 |
|---|---|
| CH2 | 3190 |
| CH3 | 3210 |
| CH4 | 3230 |
| CH5 | 3250 |
| CH6 | 3270 |
| CH7 | 3290 |
| CH8 | 3310 |
| CH9 | 3330 |
| CH10 | 3350 |
| CH11 | 3370 |
| CH12 | 3390 |
| CH13 | 3410 |
| CH14 | 3430 |
| CH15 | 3450 |
| CH16 | 3470 |
Works with
- 3.3GHz band receivers
- IRC Tramp compatible FC
- SMA 3.3GHz antennas
- Betaflight/INAV OSD
Check before selecting
- Verify antenna is 3.3GHz (3170-3470MHz)
- Confirm FC UART configured for IRC Tramp
- Confirm power supply within DC 7-30V
Not recommended
- 5.8GHz antennas (band mismatch)
- Power below 7V or above 30V
- Powering on without antenna
Product photos





