The main difference
SPI receiver code is part of the flight-controller firmware. ExpressLRS documents updating it through the FC firmware, rather than flashing it as a separate UART device with ExpressLRS Configurator.
An integrated receiver on an AIO is not necessarily SPI; integrated UART receivers also exist. Identify the type from the exact board model and hardware revision.
What to record before choosing instructions
Keep a photograph of the board markings, receiver model, frequency band and installed firmware versions. Use these details to select instructions instead of copying another device's settings.
The attached video covers SPI binding, not a universal procedure for every receiver. Check current instructions for the firmware and exact board before following it.
If the receiver does not bind
Do not start by flashing random firmware. Confirm hardware type and both firmware versions, then check the manufacturer's binding procedure. Include these details and LED behaviour when contacting support.
Related video
The video is linked from official ExpressLRS documentation and credited there to JyeSmith. Original audio is retained; this page explains the topic rather than providing a verbatim video translation.
Open on YouTube ↗Sources & verification date
This is a practical guide, not a release announcement. Source checked on 2 October 2026.
