Practice & videos 2026-10-17 MINIFLYGO
Match frame movement to the on-screen model first, then calibrate on a level, stationary surface.
Read → Practice & videos 2026-10-16 MINIFLYGO
Flashing radio firmware does not complete the SD-card update. Keep a backup, check model and version, and pause if the release list cannot load.
Read → Practice & videos 2026-10-15 MINIFLYGO
Check RF selection, script compatibility and serial baud rate before treating a radio-side loading problem as a faulty receiver.
Read → Practice & videos 2026-10-14 MINIFLYGO
LQ measures packet reception; RSSI dBm helps you assess signal-strength margin. Watching only 100% can hide an approaching sensitivity limit.
Read → Practice & videos 2026-10-13 MINIFLYGO
The same F405 MCU does not make two boards interchangeable. Verify the exact board revision before choosing firmware and features.
Read → ▶ Practice & videos 2026-10-12 MINIFLYGO
Check frequencies, Factory, power Value and Label separately. Correct menu text does not verify actual RF output.
Read & watch → Practice & videos 2026-10-11 MINIFLYGO
Confirm the connector family, centre contact and cable clearance before ordering. Real product photos show what to inspect.
Read → Practice & videos 2026-10-10 MINIFLYGO
A VTX fitting inside the frame is only the first check. Inspect cooling surfaces, labels and cable routing before fixing it in place.
Read → Practice & videos 2026-10-09 MINIFLYGO
The same binding phrase cannot fix an incompatible firmware major version. Read both versions first.
Read → Practice & videos 2026-10-08 MINIFLYGO
A camera image does not prove it passes through the FC OSD. Check routing before changing settings.
Read → Practice & videos 2026-10-07 MINIFLYGO
Binding confirms only part of the path. Follow the signal from receiver to flight controller before changing firmware or replacing hardware.
Read → Practice & videos 2026-10-06 MINIFLYGO
Spinning motors do not prove RPM telemetry works. Check ESC firmware and the return channel first.
Read → Practice & videos 2026-10-05 MINIFLYGO
The selected power setting does not explain every VTX operating mode. Check control communication, Pit Mode and disarm behaviour before changing settings.
Read → Practice & videos 2026-10-04 MINIFLYGO
The radio connects, but the flight controller sees no stick input? A Model Match mismatch is one possible cause. Follow the official checks.
Read → Practice & videos 2026-10-03 MINIFLYGO
Similar wiring does not guarantee a correct build. Remove the props, then check board orientation, motor numbering and actual rotation.
Read → ▶ Practice & videos 2026-10-02 MINIFLYGO
Identify the receiver first. Integrated SPI and separate UART receivers require different update methods.
Read & watch → Updates 2026-10-02 MINIFLYGO
New firmware features do not imply compatibility with every board. Start with the exact target and a configuration backup.
Read →